Arbortech AS170 1,450 Watt Industrial Oscillating Cutting Saw – we now supply this tool with 2 sets of different blades included in the price!
AS170 is available in 110 volt
The AS170 is a revolution in cutting technology. Using a unique patented cutting motion and two forward facing blades, the AS170 is able to perform with degrees of effectiveness and safety which were previously impossible.
The Arbortech AS170 110v is 1450w (industrial) and the 240v is 1250w (professional) and both are powerful machines.
Designed for the professional, the AS170 is made to exacting standards.
It is ideal for a variety of cutting tasks making it the most versatile and useful tool you will ever own
The AS170 is able to cut bricks, mortar, soft sandstone, natural limestone, timber, plastics, foams or any combination of these materials.
It will also cut tree-stumps (through dirt and sand) and is ideal for pruning and other landscaping tasks.
Cuts masonry materials dry, with significantly less respirable dust than disc cutters.
Unlike disc cutters the AS170 does not throw dust into the air, or kickback.
The AS170 is the only small, handheld saw able to cut to depths of 120mm (plunge blades) in masonry materials.
The AS170 is able to cut square corners, requiring no over cutting, or bolstering.
Use the AS170 to cut directly into flush walls without stitch drilling.
Ideal for cutting brickwork and walls in established and furnished houses.
Due to its ability to plunge cut to depths of 120mm, cut square corners and cut to single brick height
Renovations, alterations & building repair.
Toothing brickwork for extensions.
Fast removal of in-built objects such as anchors (wall plates, joists, trusses), frames, sills, beams, lintels, wall units and/or steps.
Expansion joints or wall section replacement.
Removal of in-built furniture, plumbing or vanities.
Cutting of archways and windows.
Repairing cracked walls.
Vents, Ducts, Registers, Plumbing, Electrical cabling & conduit, Electrical goods (air-conditioners, dryers, wall ovens, heaters, meter boxes, fans), Windows, Ablutions, Recycling units, Pass through
Cutting Width 6.5mm – 7.2mm dependant on blades
Weight 4.3Kg with cutting blades
Dimensions (without blades) 345mm x 75mm x 210mm (L x W x H)
Noise Level 108 dB max @ 1 metre
No Load Speed 6,500 rpm
Electrical Rating 110/240 Volt AC 50Hz
Dust Extraction Vacuum Hose Interface 30mm ID, EN 60335-2-69
Belt Tension 1mm max mid-span deflection with 25N deflection force
Blade Mount Bolt Torque 14Nm un-lubricated
CE Compliance EN 50144-1: 1999 incl. Amdt1, and EN 50144 2-11: 1997
Supplied With: 1 x Holdall Carry Case, 1 x Set General Purpose Blades, 1 x Set Mortar Plunge Blades, 1 x Spare Belt, 1 x Vacuum Adaptor, 1 x Tool Key, 1 x Dust Extraction Funnel